How to Keep Plumbing Water Clean?

Charlotte Miller

Updated on:

How to Keep Plumbing Water Clean?

Plumbing water supplied to residential, commercial, and industrial areas needs to be cleaned to a certain level for proper use. There are so many different levels of purification that need to be done to make sure that the water quality is optimal. Water for residential areas needs to be cleaned off not to damage the skin and be adequately pure for drinking. 

Commercial and industrial water needs to have a certain level of purification so that any manufacturing processes are not influenced or hindered by dirty water. Luckily, using zeolite 3a can prove highly effective. 

Disadvantages of Unclean Plumbing Water

Unclean or impure water has a number of drawbacks that you do not want to ever face. Some of them include the ones mentioned below:

  • In residential areas, unclean plumbing water can cause health issues like skin infections and rashes, along with other serious problems if consumed. 
  • Several industrial processes can go wrong if they are done with water with dissolved impurities. Impurities will chemically react with the components of the procedure, causing loss and other issues. 
  • The drains and pipes that transport the water from its source to different areas will corrode sooner rather than later. It will cause damage to the integrity of machines that are installed in the industries. More money will have to be invested in the repair and replacement of machines and instruments related to plumbing. Even the best globe valve manufacturer will recommend taking good care of the plumbing system. 

How to Keep the Plumbing Water Clean? 

On an industrial level, the plumbing water needs to be cleaned before it is supplied to different designated areas. Such cleaning processes will need to be carried out on a large scale for effective filtration of all the impurities. However, if you are the receiver of unclean plumbing water, you can undertake some measures on your own to make sure you are getting a clean supply. 

Cleaning Water By Yourself

If you are going to do it yourself, then make sure the method is effective and does not have any side effects. Some of the following methods have been proven effective on a residential scale:

Salt and Vinegar Concoction

If you want to try some cleaning techniques without spending a lot of money on cleaning products, we recommend this method. All you will have to do is take your table salt and put it down the drain. After you have drained the salt, throw in some vinegar. Make sure you do not immediately run water over it. After you have let it sit for 15 to 20 minutes, you can simply run hot water over it. You would be able to see some difference in the water quality if the issue is your drain pipe. 

Look for Grease Buildup

Sometimes a grease build-up in your pipe and drain can cause the plumbing water to look unclean. Luckily, you can easily clean without buying special cleaning products. Just put some detergent or dishwashing liquid down the drain, followed by boiling hot water. Pour in the water gradually so that the grease has time to melt and flow away with the water. If anything is clogging your drain pipe and is causing the water to come out murky, then this method will work well. 

Cleaning Water Industrially

If you are receiving unclean water for industrial purposes, you will have to undertake cleaning and filtering it yourself. Industrial cleaning and filtration need to be done on a large scale so, using targeted processes that are more efficient will give the best results. Cleaning it for discharge also follows a similar process. For fishing in clean water, you can choose a quality floating fish cage


Zeolite is a compound that is used for a variety of filtration purposes. Its main function is to remove moisture from the air, but it can also be used to clean final impurities from water. Unclean water can be cleaned with this compound which does not react with it and remains insoluble and hence easy to remove once the filtration is done. Zeolite molecular sieves are made for this precise purpose. 

Cleaning Mold Accumulation

Sometimes plumbing water is unclean because it has been stored in the pipes so long that mold and algae have contaminated it. In this case, bacteria and microbial growth are the biggest danger to industrial processes. Both zeolite powder and sieves can be used to filtrate these tiny microbes. 

The Takeaway

If you are tired of getting unclean plumbing water and have talked to the authorities about it, it is time to take matters into your own hands. At a residential level, your efforts will be focused on making the water used for household purposes. Industrially, you will have to undertake filtration measures on a larger scale.